If you are always last in line to enter the bathroom for a shower, you already know that a tank full of bone-chilling water is waiting for you. But in case you are facing water issues despite having a water geyser, it is about time you call in some geyser service professionals.
It is essential to mention a whole range of symptoms that can help you identify if your water heater is facing issues. These symptoms essentially include troubles with leaks, water temperature, odor, discoloration, and noise.
Troubleshooting electric water heater problems can be challenging, but it’s essential for maintaining hot water availability in your home. For detailed guidance and professional assistance, check over here. This resource offers expert solutions to common issues, ensuring your water heater operates efficiently and reliably.
Here’s a detailed breakdown of the step-by-step process for you to troubleshoot your water geyser problems.
Before You Start: Turn off The Power
Safety first! You must ideally begin your troubleshooting process by switching off the power supply of your water geyser. You can always do this by turning off the circuit breaker or fuse connected to the heater unit.
Water Temperature Problems
No one issue hinders the proper water temperature of the water geysers. However, you must realize that the most common symptoms essentially range from inadequate hot water to no hot water.
If you are not getting hot water from your geyser, the chances are that your device lacks the necessary power for functioning correctly. Ideally, you must ensure that the likes electric thermostat or the upper electric heating element is operating as usual. Therefore, it would be best if you always began by ruling out power problems.
You could also ensure that the power is reaching the electric water heating element thermostat as it should. You can test the element initially, and if it is faulty, please consider replacing it. However, if the geyser is not working despite a perfectly functioning thermostat, you must bring in a new electric water heating element.
In other cases, if you are not getting adequate hot water from the machine, the most common causes for this malfunctioning could either be an undersized water heater, a faulty heating element, thermostat, or crossed hot and cold connections. You can ensure that you don’t have a little heater by providing that your device can fill 75 percent of its capacity with hot water.
Up next, you can address the issue of crossed connection by necessarily cutting off the water supply while turning on a hot water faucet simultaneously. If you find the water is running, you have a crossed relationship. You must also check the upper and lower heating elements for power continuity. If you find it hard to identify the issue here, you can always call a geyser repair and maintenance team to help you out.
Leaks
When it comes to water leakage in geysers, the chances are high that you may be struggling with excessive pressure, a faulty temperature and pressure (T&P) relief valve, overheating, a leak because of plumbing issues. But don’t worry we cater to all issues and resolve in properly.
You can look into the T&P valve by essentially putting a bucket beneath the overhead pipe. Then it would be best if you opened the valve to flush it clear of debris. If the ultimate result is not up to satisfaction and the leakage continues to persist, you may call in a professional geyser repair team to have a look. They may find it fit to repair or replace the valve.
It is also necessary to mention that storage tanks often leak water- essentially since corrosion or faulty O-rings. Therefore, it would be best to always keep a few extra O-rings in your store as you may need them to replace.
Discoloration or Odour
If you are getting rust-colored water from your water geyser, there is a greater chance that the device has developed corrosion inside a failing sacrificial anode rod or a glass-lined tank. Therefore, you must look into both parts, and if the anode rod is failing, you can then replace it with a magnesium anode rod.
You must also realize that a decaying anode rod can release hydrogen, thereby giving out a foul smell. Therefore, it would be best if you initially considered flushing the water heater to address the bad smell. Afterward, treat the pipes and the tank with a solution of pints of present hydrogen peroxide to gallons of water for two hours.
If the smell doesn’t leave, you must consider replacing the faulty anode with a zinc-alloy anode. Alternatively, you can call a professional geyser repair team to get their expert opinion.
Noise
Finally, if your water geyser is giving away low and rumbling noise, there’s no denying that the device is malfunctioning. This means the geyser is overheating the water because of sediment build-up. You can essentially address this issue by flushing the water heater. You can also consider installing low-watt-density heating elements. This will virtually ensure superior heat-transfer efficiency for your water geyser.
Final Thoughts
If you are looking for a reliable water geyser repair team for plumbing emergencies, you may give a call at a trusted service provider store. They have skilled professionals who can come to your aid during any crisis.
