It can be very frustrating when your air conditioning breaks down during the night or any other time when you are unable to get it repaired right away.
Fortunately, should this happen, there are certain things that you can do if you want to keep from suffering from the heat until a professional air conditioning repair technician in Gladewater, TX arrives and fixes your unit.
What to Do With Your A/C
- Reset the Breaker
The circuit breaker is a safety switch that protects your electrical circuit from damage that may result in fire. If it trips, which can happen due to circuit overload, short circuit, ground fault, or arc fault, your air conditioning unit and other appliances won’t receive the power they need to operate. So you’ll find your A/C not working.
This problem can be easily fixed by resetting the breaker. Some circuit breakers come with a red or orange marker window that indicates it has tripped. If the breaker has no marker window, you’ll know if it’s tripped if the switch isn’t in the ON position. To reset the breaker, you only have to push the switch to its ON position. Ensure that all appliances and lights on the tripped circuit have been turned off before resetting the breaker.
- Replace the thermostat batteries.
If you have a battery-powered thermostat and nothing is displayed on the screen, it’s possible that the batteries just run out of juice. When the thermostat stops working, your air conditioning unit won’t work.
If you have the tools, like a flat-blade screwdriver and a new battery on hand, you can fix this problem and get your unit back up and running even without professional help. Thermostats use different kinds of batteries. To know what your thermostat uses, read the owner’s manual or open the thermostat and look at the existing battery. If your thermostat is digital and broken, you may have to call in an air conditioning repair tech in Gladewater, TX.
- Check the outdoor and indoor disconnect switch and make sure it’s on.
Your air conditioning system may have stopped functioning because someone has accidentally turned the outdoor or indoor disconnect switch “off”. The A/C disconnect switch is simply a safety feature that makes it easier for an A/C technician to cut off power from your air conditioning unit during maintenance or repair. So if someone has turned it off unknowingly, you’re unit will stop working.
Problems other than what’s mentioned above should be fixed by a professional. If you think the issue is more complex and you can’t fix it, find a local air conditioning repair company in Gladewater, TX that offers 24/7 repair service.
Tips to Stay Cool
While waiting for the techs to arrive, you can try the following to stay cool.
- Open the windows to let the cool air inside.
- Get some towels, run them under cold water, and place them around your neck. You can also put a towel inside a plastic bag and leave it in your freezer. You can use it to cool your body.
- Make the air from a table fan cooler by placing a bowl full of ice in front of the fan.
- Avoid using heat-inducing appliances, such as an oven and stove.
- Heat rises. So if you’re in a multi-story home, go to the lowest part of your home (the basement floor or living room). It’s less hot in there.
Save Your Local HVAC Contractor’s Number on Your Phone
An air conditioning unit can break down at any time of the day. Therefore, it’s smart to keep the number of your trusted, local air conditioning repair contractor in Gladewater, TX on your phone. So, in case your unit breaks down in the wee hours of the day, you can easily call for help.
Take note, however, that not all air conditioning contractors are the same. Before saving the number of an HVAC contractor, do some research and make sure they respond to emergency calls fast and can fix your problem.
If you need an emergency air conditioning repair in Gladewater, TX, contact Napps Cooling, Heating & Plumbing at 903-758-6482. The company is open 24 hours a day.
